Introducing the Swimnerd Personal Pace Clock!

ABOUT THE SWIMNERD PERSONAL PACE CLOCK

Voted Best Mini Pace Clock For Swimmers

Bluetooth enabled, it connects to the Swimnerd App which allows you to control your pace clock from your phone. Program custom intervals really fast or input your entire practice!

It can count up. It can count down. Let the rep counter count your reps. It can function as a 12/24 hour real time clock or use it as a stopwatch. Program simple intervals into the clock using the buttons on top.

No, you cannot see this across a 25 yard pool. They are not good in full sun. And you can't use the buttons once it is in the case. 

Each personal pace clock comes with an IP67 rated waterproof case.

6-digit, 1" inch tall, green LED bars. 4 brightness settings. If you are outside in direct sunlight we recommend the kickboard visor method.

Powered by a USB-A to USB-C power cable (included). Internal battery lasts 4-5 hours on highest brightness setting, up to 8-9 hours on the lowest.

6" x 2" x 1" (L x W x H); weighs less than 1 pound!

One year manufacturer's warranty. 

CUSTOMER SERVICE

Click here for FAQ's, instructional manuals, videos, and hot tips.

Call or text 757-996-5512.

We are not responsible for your country's customs clearance fees, whatever they may be.

Buttons
There are 5 buttons on the top of the Swimnerd Personal Pace Clock. You can click, double click, or hold down the buttons.

From left to right, the buttons are as follows:

Power: hold it down, and the clock turns on. Hold it down again, the clock turns off.
Brightness: click it to toggle between brightness settings. When configuring the Real Time Clock or programming a set, this button is used to toggle to the correct number.
Switch Modes: click it to toggle between the 5 modes of the clock. If a mode is currently running you must first Pause before you can switch modes. Holding this button down also mutes the clock.
Enter/Configure: hold it down to configure the mode; click to enter and move to the next number
Start/Pause/Reset: click to start a mode; click to pause a mode; double click to reset

5 Modes
1: Count up endlessly (default)
2: Real Time Clock (24 hour)
3: Real Time Clock (12 hour)
4: Interval Set (add Reps and Intervals)
5: Stopwatch

Mode 1: Default Count Up
When powered on, the Swimnerd Personal Pace Clock begins counting up endlessly. Pressing (Start/Pause/Reset) will pause the clock and allow you to switch modes. If you double click, you will revert back to 00:00. This makes syncing multiple clocks easy.

Mode 2: Real Time Clock (24 Hour)
Hold down the Enter/Configure button. You will see the first digit now flashing. Use the Brightness button to toggle the number. When you have landed on the right number, click the Enter/Configure button to move to the next digit. Whenever you are finished choosing the appropriate time, hold the Enter/Configure button down to save the time and begin counting. Another great way to sync multiple pace clocks is to configure them all with the same Real Time
Clock time. Not only do you know what time it is, but your clocks will be synced even if you lose power.

Mode 3: Real Time Clock (12 Hour)
Setting the 24 Hour RTC automatically sets your 12 Hour RTC. You do not need to do anything in the mode.

Mode 4: Reps & Intervals
Hold down the Enter/Configure button to begin adding Reps and Intervals. The clock basically asks you: "How many Reps? How many Intervals?" 

The first digit furthest to the left will begin blinking. Use the Power Button (this will toggle the rep down) or the Brightness button (this will toggle the reps up) to toggle the number of Reps. Click the Enter/Configure button to move to the next digit. 

The first two digits are your # of Reps. The last four digits are your interval (MM:SS).

Hold the Enter/Configure button down to move on to the next set. 

Let’s say you don’t want to enter any more intervals. Click Start/Stop/Pause. The clock is now programmed and ready to start.

Double click the Enter/Configure button to toggle between Counting Up & Counting Down. You'll notice the LED shows you if it is Up or Down.

Click Start/Stop/Pause button to begin your set.

When your set is finished, your clock will elicit a long beep and begin to default count up again.

Mode 5: Stopwatch
Click Start/Stop button to start/stop the stopwatch. Double click it to reset.

Connect to Bluetooth
Download the Swimnerd mobile app on iOS or Google. Once signed up, go to TOOLS – CONNECT TO CLOCK – SCAN. "HC-08" will show up. Click on it to connect. Now, you can change the name by clicking the icon. Click CLOCK on the bottom of the app. This clock control center is basically a super remote. Program anything you want into it with just a few clicks. Including, any sort of descending or ascending ladder set.

Charging
Each Swimnerd PPC comes with a USB-C to USB-A charging cable. Connect it into your phone block, and you are ready to charge. There is a little red indicator light on the top of the clock. When it turns off, your clock is fully charged. If you are inside, you can bring the brightness setting down and save a ton of battery charge.